EVA Foam Density Chart: How to Understand and Compare Density

EVA foam density is an important reference when footwear manufacturers compare materials for midsoles, outsoles, slippers, and other footwear components. A density chart can help buyers understand how much material is contained in a given volume and compare published values across different products or studies.

However, there is no single industry-wide EVA foam density chart that defines universal low-, medium-, and high-density grades. Published values vary with the foam formulation, cellular structure, manufacturing process, product design, and measurement method.

The research examples below provide useful reference points, but they should not be treated as specifications for every commercial EVA foam. Manufacturers should use supplier datasheets and application-specific testing when selecting a material.

What Is EVA Foam Density?

EVA foam density describes the mass of the finished cellular material per unit of volume. It is commonly calculated using:

Density = Mass ÷ Volume

The two most common units are:

  • kg/m³: Kilograms per cubic meter.
  • g/cm³: Grams per cubic centimeter.

The conversion is:

1 g/cm³ = 1,000 kg/m³

EVA foam contains gas-filled cells within a polymer structure. Its apparent density therefore reflects the mass of the entire foam specimen, including the polymer and other formulation ingredients, divided by its external volume. It is not the density of the solid EVA polymer that forms the cell walls.

This distinction is important because EVA resin density and finished EVA foam density describe different materials. EVA resin is the unfoamed copolymer used as a base material, while EVA compound contains additional ingredients. After foaming and molding, the resulting cellular material has its own apparent density.

In many footwear applications, the finished foam has a much lower apparent density than the unfoamed resin because of the gas-filled cellular structure.

Density is relevant to material weight and can influence compression behavior. However, it does not independently determine hardness, cushioning, rebound, or durability.

EVA Foam Density Chart: Understanding Published Values

Published research provides useful examples of EVA foam densities, although the values must be interpreted in the context of each study.

Research-Based EVA Foam Density Examples

A 2024 study, Mechanical Behavior of Closed-Cell Ethylene-Vinyl Acetate Foam under Compression, examined five closed-cell EVA foam specimens with different densities.

The researchers reported that the specimens came from the same production batch and had a consistent material formulation. Their density values were:

EVA Foam SpecimenDensity (kg/m³)Density (g/cm³)
Specimen 1800.080
Specimen 2950.095
Specimen 31060.106
Specimen 41240.124
Specimen 51800.180

These figures provide a research-based reference for comparing closed-cell EVA foam specimens. They are not universal commercial density grades, nor do they establish the complete density range used in footwear manufacturing.

The study also examined how density affected compression behavior and energy absorption. Under the test conditions, the specimens showed differences in elastic modulus, yield strength, and energy absorption characteristics. This illustrates why density should be evaluated alongside mechanical performance rather than treated as a standalone quality indicator.

EVA Foam Density Examples from Footwear

A separate study, Mechanical Ageing Performance of Minimalist and Traditional Footwear Foams, measured EVA foam in running shoe midsoles.

Its reported density examples included:

Footwear SampleFoam RegionDensity (kg/m³)Density (g/cm³)
Minimalist running shoeMidsole foam2400.240
Traditional running shoeHeel region1600.160
Traditional running shoeForefoot region2500.250

These values show that different footwear designs and shoe regions can use foam materials with different densities. In the traditional shoe examined, the forefoot foam had a higher density than the heel foam.

The figures are measurements from particular footwear samples, not recommended density specifications for all midsoles or running shoes.

The two studies should also be considered separately. They used different samples and research conditions, so their values should not be combined into one controlled product comparison.

For more information, see the research on closed-cell EVA foam compression behavior and the study of mechanical ageing performance in minimalist and traditional footwear foams.

Low, Medium, and High Density EVA Foam

Suppliers may describe their products as low-density, medium-density, or high-density EVA foam. These labels can help organize a manufacturer’s product range, but they do not represent universal EVA foam classifications.

The numerical boundaries can differ between suppliers and applications. A density described as high by one manufacturer may not carry the same label in another product range.

The general characteristics below can help explain the terminology, but they should not be used as fixed material specifications.

Lower-Density EVA Foam

Lower-density EVA foam contains less mass per unit volume. At the same component volume, it generally weighs less than a higher-density foam.

It may be considered when manufacturers prioritize weight reduction or a particular cushioning response. However, the actual cushioning and compression performance depends on the formulation, cell structure, hardness, and recovery behavior.

Intermediate-Density EVA Foam

Intermediate-density products may offer a balance between material weight and mechanical requirements. They can be considered when a footwear design needs a specific combination of cushioning, firmness, and structural performance.

The label itself does not establish whether a material is suitable. Manufacturers should compare the actual test data and finished-component performance.

Higher-Density EVA Foam

Higher-density EVA foam contains more mass per unit volume. Depending on the formulation and cellular structure, it may provide different compression and structural characteristics from a lower-density grade.

It can be considered for components requiring a particular level of material mass or support, but higher density does not automatically mean greater hardness, strength, or durability.

For a more detailed discussion of the characteristics and applications of higher-density grades, see the guide to high density EVA foam.

EVA Foam Density in g/cm³ and kg/m³

Suppliers and research papers may report EVA foam density using different units. Buyers should convert the values before comparing products.

The following table provides a simple unit conversion reference.

Density (g/cm³)Density (kg/m³)
0.08080
0.100100
0.120120
0.150150
0.180180
0.200200
0.250250
0.300300

This is a unit conversion table, not a recommended EVA foam grade chart. The values do not define low-, medium-, or high-density classifications.

For example, a supplier reporting 0.180 g/cm³ is reporting the same density as 180 kg/m³. The unit changes, but the material property does not.

When comparing technical datasheets, manufacturers should also confirm that the reported values refer to the same type of measurement. Apparent density, bulk density of loose particles, and solid polymer density are not interchangeable.

How Is EVA Foam Density Measured?

The basic principle of foam density measurement is straightforward: measure the mass and volume of a representative specimen, then divide the mass by the volume.

For cellular materials, the relevant reference is apparent density. ISO 845:2006, Cellular Plastics and Rubbers — Determination of Apparent Density, specifies a method for determining apparent overall density and apparent core density.

These measurements are particularly relevant when a molded or extruded foam product has a surface skin.

  • Apparent overall density: Includes the molded or extruded skin in the specimen.
  • Apparent core density: Measures the foam after the surface skin has been removed.

The results may differ because the skin and internal cellular structure do not necessarily have the same density.

Sample geometry, surface condition, dimensional measurement, and specimen preparation can also influence the reported result. For meaningful comparisons, manufacturers should use consistent sample preparation and measurement methods.

The ISO 845 standard for apparent density measurement provides the relevant measurement framework. For a more detailed practical explanation, refer to the existing guide on the EVA foam density test method.

Does Higher EVA Foam Density Mean Greater Hardness?

No. Density and hardness are different material properties.

Density measures mass per unit volume, while hardness measures resistance to indentation under a specified test method. A foam’s hardness cannot be accurately determined from its density value alone.

Other mechanical properties are also important:

  • Compression resistance: Describes how the foam responds to compressive loading and how much it deforms under specified conditions.
  • Resilience: Describes the material’s ability to recover after deformation and return energy.
  • Compression set: Measures the permanent deformation remaining after a specimen has been compressed and allowed to recover.

Density can be related to mechanical behavior within a particular material system. For example, the closed-cell EVA foam compression study found differences in elastic modulus and yield strength among specimens with different densities.

However, those results apply to the tested formulation and conditions. They do not establish a universal relationship between EVA foam density and hardness across all commercial grades.

Manufacturers should therefore evaluate density together with hardness, compression behavior, resilience, and compression set. The guide to EVA foam material properties provides further information on these related characteristics.

How EVA Foam Density Relates to Footwear Applications

EVA foam is used in several footwear components, but the appropriate density depends on the product design and intended function.

EVA Midsoles

Midsoles are important to footwear cushioning and support. Manufacturers may select foam grades with different density and compression characteristics to achieve the required balance between weight and cushioning.

Some designs also use different foam densities in separate midsole regions. The footwear research example above demonstrates how heel and forefoot regions can have different measured densities.

EVA Outsoles and Bottom Units

EVA-based materials may be used in outsole-related or bottom-unit constructions when their formulation and performance meet the requirements of the application.

Density is only one consideration. Wear resistance, grip, flexibility, and the overall construction must also be evaluated. A higher-density foam is not automatically suitable for direct ground contact.

Slippers and Sandals

EVA foam is widely used in slipper and sandal soles. Material selection depends on the desired weight, flexibility, firmness, and compression response.

A lightweight design may prioritize lower material weight, while another product may require a different balance of support and structural performance. The appropriate density should be confirmed through material testing and finished-product evaluation.

Multi-Density Footwear Construction

Some footwear designs combine materials with different density and hardness characteristics. This allows manufacturers to adjust the response of individual areas rather than relying on one foam grade throughout the product.

The selection should reflect the intended loading conditions, component geometry, and performance targets.

For a broader overview of the production stages involved, see the guide to EVA sole manufacturing.

How to Choose the Right EVA Foam Density

Choosing the right EVA foam density requires more than comparing numbers on a chart. Manufacturers should evaluate the material according to the requirements of the finished footwear component.

A practical selection process includes:

  1. Define the application. Identify whether the foam is intended for a midsole, outsole-related component, slipper sole, heel section, or another footwear part.
  2. Set weight and cushioning targets. Determine the required balance between finished-product weight, flexibility, and cushioning.
  3. Review supplier data. Check apparent density, hardness, and the relevant test methods rather than relying on a product label alone.
  4. Evaluate compression and recovery. Review compression resistance, rebound resilience, and compression set where relevant to the application.
  5. Check sample consistency. Compare samples and production batches to identify variations in density and cellular structure.
  6. Confirm process compatibility. Make sure the material is suitable for the intended compounding, foaming, and molding process.
  7. Test finished components. Evaluate the actual footwear component under conditions that reflect its intended use.

Foam density consistency is also influenced by material preparation and production control. Formulation, foaming conditions, mold design, and processing equipment can all affect the finished cellular structure.

ONE-NINE Machinery Co., Ltd. provides footwear production machinery under the KING SUN brand, including EVA foaming machines. Suitable equipment and consistent process control can support production repeatability, while material testing remains necessary to verify the final density and performance.

Conclusion

An EVA foam density chart is useful for understanding published values and comparing materials, but it should not be treated as a universal classification system. Research examples range from 80 to 180 kg/m³ in one closed-cell EVA foam study, while footwear midsole samples in another study included values of approximately 160 to 250 kg/m³.

These figures illustrate the variation in EVA foam density across different materials and applications. They do not define universal low-, medium-, or high-density grades.

For footwear manufacturers, density should be evaluated alongside hardness, compression resistance, resilience, compression set, cell structure, and product design. Supplier datasheets, consistent measurement methods, and finished-component testing provide a more reliable basis for selecting the right EVA foam than density alone.

Similar Posts

3 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *