Injection Molding Machine Maintenance: A Practical Guide for Manufacturers

Why Is Injection Molding Machine Maintenance Important?

Injection molding machine maintenance helps manufacturers keep production equipment in reliable operating condition. Regular inspection and servicing can identify developing problems before they cause unexpected downtime, inconsistent production, or more extensive component damage.

For footwear manufacturers, equipment reliability directly affects production continuity. Problems with machine movement, temperature control, lubrication, or other operating systems may interrupt the production of EVA and PVC footwear components.

Factories generally use three maintenance approaches:

  • Reactive maintenance: Equipment is repaired after a fault or failure occurs. This approach may lead to unplanned downtime and production disruption.
  • Preventive maintenance: Machines are inspected, cleaned, lubricated, and serviced according to a planned schedule. The goal is to identify wear and potential problems before they develop into major failures.
  • Predictive maintenance: Equipment condition is monitored through methods such as oil analysis, vibration measurements, temperature monitoring, and other diagnostic techniques. Maintenance decisions are based on observed equipment condition.

Predictive maintenance can provide useful information for machines with suitable monitoring capabilities, but it is not necessary for every factory or machine. A well-organized preventive maintenance plan is a practical starting point for most production environments.

Key Components That Require Regular Maintenance

The maintenance requirements of an injection molding machine depend on its drive system, clamping mechanism, injection configuration, and auxiliary equipment. Hydraulic, electric, and hybrid machines do not have identical maintenance needs.

Hydraulic System

For hydraulic injection molding machines, the hydraulic system requires attention because it supplies power to relevant machine movements and mechanisms.

Important inspection areas include:

  • Hydraulic oil level and visible condition.
  • Oil leakage around hoses, fittings, pumps, cylinders, and connections.
  • Hydraulic filter condition and service history.
  • Abnormal pump noise or operating temperature.
  • Changes in hydraulic pressure or machine movement.
  • Signs of oil contamination or degradation.

Hydraulic oil cleanliness affects the reliability of pumps, valves, and other hydraulic components. Oil selection, filtration, and replacement should follow the machine manufacturer’s specifications.

ARBURG’s operating-material guidance, for example, emphasizes approved hydraulic oils, lubricant compatibility, oil cleanliness, and condition monitoring. Its specific oil grades and cleanliness requirements apply to relevant ARBURG equipment, not automatically to every injection molding machine.

Fully electric machines do not require routine hydraulic oil maintenance unless they include hydraulic systems for particular functions.

Electrical and Control System

The electrical and control system manages machine operation, monitoring, and safety functions. Its condition can affect production stability and equipment protection.

Maintenance personnel should check:

  • Electrical cabinet cleanliness and ventilation.
  • Visible signs of overheating or damaged wiring.
  • Loose or deteriorated external connections.
  • Machine alarms and error records.
  • Sensor and limit-switch condition.
  • Temperature-control functions where installed.
  • Emergency stops and safety interlocks.

Electrical cabinets should only be opened and inspected by qualified personnel following the appropriate energy-isolation procedures. Routine operators should not perform live electrical work or attempt unauthorized repairs.

Injection Unit

The injection unit varies according to the machine design.

On conventional thermoplastic plastic injection molding machines, relevant components may include the screw, barrel, nozzle, heating elements, and temperature sensors. Maintenance may involve monitoring wear, checking for leakage, and observing changes in plasticizing or injection performance.

However, not every EVA footwear injection molding machine uses the same screw-and-barrel configuration. EVA footwear equipment may have different material preparation, injection, and molding arrangements.

Manufacturers should identify the actual injection configuration before applying conventional plastic injection molding maintenance procedures. For example, screw wear measurements are relevant to machines equipped with the corresponding plasticizing screw, but should not be treated as a universal inspection requirement for all EVA footwear machinery.

Clamping Unit

The clamping unit opens and closes the machine’s mold area and maintains the required clamping force during production.

Depending on the machine structure, inspection areas may include:

  • Moving and fixed platens.
  • Tie bars and guide surfaces.
  • Lubrication points.
  • Clamping mechanism movement.
  • Visible wear or damage.
  • Abnormal noise, vibration, or uneven movement.

Machines may use toggle, hydraulic, or other clamping arrangements. Inspection and adjustment procedures must match the actual mechanism and manufacturer instructions.

Lubrication and Cooling Systems

Lubrication reduces friction and wear at designated moving components. Maintenance teams should check lubricant levels, supply lines, distribution points, and automatic lubrication functions where installed.

Different lubrication points may require different oils or greases. Use only manufacturer-approved products, and do not mix lubricants unless compatibility has been confirmed.

Cooling systems also require regular attention where fitted. Check water flow, visible leakage, pipe connections, and signs of restricted cooling lines. Unusual temperature changes may indicate a cooling-system issue or another operating problem.

Stable cooling conditions help maintain consistent process conditions and protect temperature-sensitive components. Water temperature, flow rate, and pressure requirements must be taken from the relevant machine specifications rather than assumed to be universal.

Machine Safety Devices

Safety devices protect operators and maintenance personnel from moving parts, electrical hazards, and other machine-related risks.

Check the condition and function of:

  • Safety doors and protective guards.
  • Mechanical, electrical, or hydraulic interlocks where installed.
  • Emergency stop devices.
  • Protective covers.
  • Warning systems and alarms.

Safety guards and interlocks must remain functional. They should never be bypassed or removed to keep production running.

OSHA identifies crushing and amputation hazards around injection molding machine clamping areas and emphasizes the importance of functioning guards and interlocks. Its guidance also highlights the need for lockout/tagout during maintenance when workers may be exposed to hazardous machine movement.

Injection Molding Machine Maintenance Checklist

A structured checklist helps operators and maintenance teams identify problems consistently. The following items are general examples. Actual tasks and inspection intervals depend on the machine manufacturer’s manual, operating hours, production intensity, environment, and equipment condition.

Daily Maintenance Checklist

Inspection ItemWhat to Check
Fluid leakageLook for visible hydraulic oil, cooling water, or other fluid leaks
Hydraulic oilCheck the oil level on machines equipped with hydraulic systems
Machine operationObserve abnormal noise, vibration, or unusual movement
Safety devicesCheck accessible guards, safety doors, and emergency stops
Machine alarmsReview alarms and abnormal operating records
Cooling systemCheck visible pipes and connections for leakage
Moving componentsObserve whether accessible moving parts operate normally
TemperatureWatch for unusual temperature changes or unstable readings

Operators should report abnormal conditions rather than attempting repairs beyond their training and authorization.

Weekly Maintenance Checklist

Inspection ItemWhat to Check
LubricationInspect accessible lubrication points and supply conditions
Hydraulic connectionsCheck visible hoses, fittings, and connections for deterioration or leakage
Cooling pipesInspect accessible water pipes and connections
Electrical componentsCheck accessible cables and connectors for visible damage
Moving componentsLook for wear, looseness, or abnormal movement
Alarm historyReview recurring alarms and operating irregularities
Machine cleanlinessRemove accumulated dust and residue from accessible areas

Periodic Maintenance Checklist

Inspection ItemMaintenance Consideration
Hydraulic oilCheck oil condition and arrange laboratory analysis where appropriate
FiltersInspect or replace according to the manufacturer’s schedule
Pumps and motorsArrange condition inspections where applicable
Cylinders and valvesCheck for leakage, wear, or abnormal operation
Clamping mechanismInspect condition and alignment as specified by the manufacturer
Heating systemCheck heating elements and temperature sensors where applicable
Electrical systemArrange qualified inspection of connections and protective devices
Machine calibrationArrange professional inspection or calibration when required
Major componentsEvaluate wear and determine whether repair or replacement is necessary

These tables are not fixed daily, weekly, or monthly service requirements for every machine. The appropriate schedule should be based on the equipment manual, operating hours, production conditions, and maintenance history.

Preventive Maintenance Procedures for Injection Molding Machines

A preventive maintenance program should cover cleaning, lubrication, system inspection, component condition, and maintenance records. The exact procedures depend on the machine configuration.

Cleaning and Inspection

Keep accessible machine surfaces and surrounding areas free from accumulated dust, material residue, and contamination. Check accessible components for leakage, corrosion, visible damage, and abnormal wear.

Ventilation openings and accessible cooling areas should remain clear. Cleaning methods must be suitable for the machine and its electrical and mechanical components.

Lubrication

Identify the lubrication points and use the lubricant specified for each location.

Follow the manufacturer’s recommended quantity and frequency. Insufficient lubrication can increase friction and wear, while excessive lubrication may cause contamination or other problems.

Do not assume that one type of grease or oil is suitable for every lubrication point. ARBURG’s operating-material guidance illustrates why lubricant compatibility and machine-specific approval matter. Its approved products should not be treated as universal recommendations for other manufacturers’ equipment.

Hydraulic Oil and Filter Management

For hydraulic machines, monitor oil level, condition, and cleanliness. Contamination and degradation can affect hydraulic components and machine operation.

Follow the specified oil and filter service schedule, and use approved replacement materials. Oil analysis can help identify changes in viscosity, oxidation, water content, and contamination when the machine and maintenance program call for it.

Electrical System Inspection

Qualified technicians should inspect electrical components for visible overheating, damaged wiring, loose connections, and control-system irregularities.

Before servicing electrical equipment, personnel must follow the applicable energy-isolation procedure. Routine operators should not open energized electrical cabinets or attempt electrical repairs.

Mechanical Component Inspection

Monitor moving parts for looseness, wear, abnormal movement, and unusual noise. Check the clamping mechanism and injection system according to the machine’s actual configuration.

Adjustments and component replacement should follow manufacturer procedures. Complex mechanical, hydraulic, and electrical repairs should be handled by qualified maintenance personnel.

Maintenance Records

A maintenance record helps factories track equipment condition and identify recurring problems.

Useful records include:

  • Inspection dates and operating hours.
  • Abnormal sounds, movements, or temperature changes.
  • Machine alarms and error records.
  • Maintenance work performed.
  • Oil and filter inspection results where applicable.
  • Replaced components and repair history.
  • Follow-up actions and responsible personnel.

Reviewing these records can help maintenance teams recognize recurring issues and adjust inspection priorities.

Common Injection Molding Machine Problems and Maintenance Considerations

A machine symptom does not always have one specific cause. Equipment condition, material preparation, mold condition, process settings, and operator practices may all affect production results.

The following table provides possible inspection directions rather than definitive fault diagnoses.

Common SymptomPossible Areas to InspectMaintenance Consideration
Hydraulic oil leakageHoses, fittings, seals, cylindersLocate the source and arrange repair or component replacement
Abnormal pump noiseOil condition, pump, suction lineCheck for contamination, insufficient oil, or component problems
Unstable machine movementHydraulic or drive system, sensors, mechanical componentsReview operating data and inspect the relevant system
Temperature fluctuationsHeating elements, sensors, cooling system, controlsCheck sensor readings and temperature-control performance
Inconsistent injection performanceInjection mechanism, drive system, process settings, material conditionsDetermine whether the issue relates to equipment, material, or process conditions
Abnormal clamping movementClamping mechanism, guides, lubrication, control systemInspect movement and mechanical condition
Repeated electrical alarmsSensors, wiring, control components, power supplyRecord the alarm and arrange qualified electrical diagnosis

ENGEL’s preventive maintenance information provides examples of condition-based inspections, including screw wear measurement on applicable machines, oil analysis, injection-pressure checks, and temperature-sensor monitoring. These methods demonstrate how diagnostic measurements can support maintenance decisions, but their availability depends on machine design and manufacturer support.

Injection Molding Machine Maintenance Cost and Service Life

Maintenance costs and equipment service life depend on the machine’s configuration, operating conditions, and maintenance history. There is no single cost or service-life figure that applies to every injection molding machine.

What Affects Maintenance Costs?

Several factors influence the cost of maintaining an injection molding machine:

  • Machine type and configuration: Hydraulic, electric, and hybrid systems have different components and maintenance requirements.
  • Machine age and operating hours: Older equipment or machines with intensive operating schedules may require more frequent attention to worn components.
  • Production environment: Dust, temperature, humidity, and other operating conditions can affect equipment condition.
  • System complexity: Hydraulic, electrical, mechanical, and control-system configurations influence inspection and repair requirements.
  • Replacement components: Availability and cost of parts can affect maintenance expenses and downtime.
  • Unexpected failures: Unplanned repairs may involve additional production losses and urgent technical support.
  • Maintenance planning: Regular inspections can help identify problems earlier and make servicing easier to schedule.

A planned maintenance budget should account for routine inspection, consumables, replacement components, qualified technicians, and potential production interruptions. The actual budget should be based on the factory’s equipment inventory and operating history rather than a generic industry percentage.

How Long Do Injection Molding Machines Last?

The service life of an injection molding machine depends on its original design and quality, operating hours, production intensity, maintenance history, working environment, and availability of replacement components.

Individual components may have different service lives. A pump, motor, sensor, heating element, or control component may need replacement while the main machine structure remains serviceable.

Regular maintenance can help preserve equipment condition, but it does not guarantee a specific number of operating years. Manufacturers should evaluate the condition of major components and consider the availability of technical support and spare parts when planning long-term equipment use.

How to Develop an Effective Preventive Maintenance Plan

An effective maintenance plan should match the actual machine rather than rely on a generic checklist alone.

Manufacturers can establish a practical system by following these principles:

  1. Identify the machine configuration. Record the machine type, drive system, clamping mechanism, injection arrangement, and major auxiliary systems.
  2. Obtain the correct maintenance manual. Use the equipment manufacturer’s documentation for lubricant specifications, inspection procedures, and service intervals.
  3. Set inspection responsibilities. Assign authorized routine checks to operators and technical inspections or repairs to qualified maintenance personnel.
  4. Create a maintenance schedule. Organize daily, weekly, and periodic tasks according to operating hours, production intensity, and equipment condition.
  5. Record machine performance. Track operating hours, alarms, abnormal conditions, inspection results, and replacement history.
  6. Review recurring problems. Use maintenance records to identify repeated faults and determine whether inspection priorities need adjustment.
  7. Arrange technical support when necessary. Seek manufacturer or qualified service support for complex faults, major component inspections, and machine-specific adjustments.

For footwear factories, maintenance planning should also reflect the equipment used in the actual production process. An EVA injection molding machine may have different structural and operating requirements from a conventional thermoplastic injection molding machine. Reviewing an EVA injection molding machine guide can help manufacturers understand equipment configurations before establishing maintenance procedures.

Equipment reliability also affects the wider EVA footwear manufacturing process, where interruptions can influence production continuity and component consistency.

KING SUN, the brand of ONE-NINE Machinery Co., Ltd., provides machinery and production solutions for EVA, PVC, and other footwear manufacturing applications. With more than 40 years of experience in footwear machinery and 24/7 rapid-response service, the company supports manufacturers evaluating equipment and production arrangements. Factories should consult the relevant machine documentation and technical personnel for model-specific maintenance requirements.

Conclusion

Injection molding machine maintenance is an ongoing process that combines routine inspection, preventive servicing, equipment monitoring, and accurate maintenance records.

A practical maintenance plan should cover the systems installed on the machine, including hydraulic, electrical, injection, clamping, lubrication, cooling, and safety components where applicable. Daily, weekly, and periodic checklists help organize inspections, but actual maintenance intervals and procedures must follow the manufacturer’s recommendations.

For EVA and PVC footwear manufacturers, understanding the differences between machine configurations is particularly important. By matching maintenance procedures to the equipment design and assigning technical work to qualified personnel, factories can manage equipment condition more consistently and reduce avoidable production interruptions.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *